FCI provides move change to guard from dry operating

Fluid Components International’s dual alarm FLT93 Series circulate swap offers an early warning alert to the potential of dry working conditions, cavitation and other pump issues that may lead to emergency shutdowns and dear upkeep.
The FLT93 Series flow swap reliably screens the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series flow swap reliably monitors the circulate and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, surprising reductions in media circulate rates can go away pumps susceptible to over-heating circumstances that shutdown process strains and require troubleshooting and fixing. The SIL2 rated instrument is intended for heavy-duty, probably hazardous process business environments and comes with a comprehensive list of global safety approvals.
It has a no shifting components design and offers a strong scheme for pump safety with its dual alarm functionality. With Alarm 1, the swap detects a low move situation anyplace between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low circulate alarm is a pre-warning signal for the control system or operator who can then resolve to keep the pump working or to shut it down.
If pressure gauge ไท วัสดุ happens as a end result of the feed line to the pump is operating dry, this would be an emergency sign to close down the pump instantly as a outcome of the bearings now see gas as a substitute of a liquid as a warmth transfer media. In such situations, the temperature of the bearings could rise very quick. Using a flow swap prevents permanent damage to the pump’s bearings.

Latest Post