A Better Alternative!

There is a growing development towards electrification and an ever-increasing demand for more energy-efficient alternatives to compressed air methods. The primary elements for consideration when choosing the ideal different actuator kind tend to be cost, risk, efficiency and availability.
Cost discount

Electric valves provide significantly higher effectivity, and consequently a greater power stability, in comparability with pneumatic systems. The discount to a single power type ends in cost financial savings by way of decrease installation and upkeep requirements. Additionally, the system availability is elevated, since potential faults are reduced.
Risk reduction

In the pharmaceutical/biotechnology industries, the critical process steps require sterile compressed air. The technology of sterile compressed air along with the sterilising functionality of the complete system must be considered. Electrical valves can remove the risk of contamination. In regard to industrial applications, if contaminated compressed air gets into the system or if there are fluctuations within the compressed air network, it can result in irreparable malfunctioning of pneumatic parts.
Performance enhance

Thanks to their exact control systems with no overshooting and independence from the medium pressure, motorized valves are a becoming alternative for control purposes. In conjunction with an especially excessive positioning accuracy, this leads to appreciable increases in productivity. A wide range of parameterization and diagnostic amenities that kind the premise for rising digitalization are often a half of electrical valves (industry applications).
pressure gauge 10 bar

In many areas of utility, there is simply no compressed air out there for all kinds of causes. In distinction to this, electrical energy is practically ubiquitous – electrically operated valves can be utilized nearly anyplace in the facility.
The right alternative of valve

GEMÜ presents an intensive vary of electrical valves for a broad variety of purposes.
The GEMÜ R629 eSyLite is a low-cost diaphragm valve for simple and cost-sensitive applications. It constitutes an economical alternative to solenoid valves made from plastic or motorized plastic ball valves. Alternatively, GEMÜ eSyStep valves are designed for traditional open/closed and simple management functions, that includes a compact spindle actuator with step motor and can be mounted with electrical position indicators or travel sensors.
For variable and complicated open/closed and control applications, GEMÜ eSyDrive is more appropriate. Designed on the basis of the hole shaft principle in conjunction with expertise that does not use brushes/sensors, the eSyDrive actuator sets new requirements when it comes to service life, compactness, actuating pace and vitality effectivity. The self-locking actuator also provides a high stage of reproducibility for positioning and is due to this fact best for use in control applications.
Thinking of switching from a compressed air system to an energy-efficient alternative? Get in contact to learn the way we are able to help!

For more data, click on here.
YouTube Video: Commissioning GEMÜ eSyDrive: