The versatility of Pneumatic excessive pressure grouting pumps

Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. pressure gauge ไท วัสดุ is primarily used for injecting (grouting) bar anchors and the drill holes to be able to reinforce the unfastened rock mass. The most grain measurement cannot exceed zero.2 mm.
Grouting pump operation and maintenance is easy, protected and reliable. This pump is utilized in mines operating under troublesome situations as a result of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base frame and stand, stress gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it really works
Pneumatic strain in the air cylinder exerts a excessive pressure on the grout combination which ends up in ejection of grout with a excessive strain and velocity. The valves of the air cylinder within the pump function automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump may be pushed even with out Electrical power provide in distant areas through the use of engine driven compressor.
The pump is majorly utilized in construction and mining business for injecting material into wide and medium measurement gap in beams, columns ,basement partitions and flooring, lift shaft concrete wall fill-up and so forth. In mining ราคาpressuregauge is used to fill up cement resolution where there’s a gap exists between construction and rock and for soil stabilization.
Detachable design tends to easy upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly used in tunnels, coal mine, bridges and dams, building foundation, and different underground projects, and inflammable, explosive websites and different unhealthy setting.
It has application in chemical business additionally to pump out chemical slurries.
The pump is electrical energy free so, can be used at any site situation whether or not it’s rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment vary. Generally the ultimate quantity of the grouting volume is 8 or10 times of the quantity in the beginning. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s pressure and flow could be adjusted based on the necessities of grouting,(The move of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electrical energy, building, mining etc. ground/underground development.
Mining Pneumatic Grouting pump has the advantages of low vitality consumption, small vibration, low noise, small dimension, high efficiency, reliable efficiency, pressure and flow management, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried easily. It is designed for easy operation and low maintenance. Last but not least its spare components are simply obtainable.

Latest Post